Tips for nailing the nails

Nails Tip 1: How to Put Nails in a Cement Wall
 
1: buy steel nails
 
2: Drill a small hole with an electric drill, make an expansion glue or a wooden stick, and then nail it
 
When nailing nails on a concrete wall, it is always impossible to nail it smoothly. At this time, a thick layer of newspaper is placed at the position to be nailed to avoid the occurrence of bending of the nails.
 
Nails Tip 2: Nails on thin boards or wood that is easy to split, and the wood is often easy to split. If the nail tip is cut flat and then nailed with steel warp pliers, the wood will not crack.
 
Nails Tip 3: Nails in hard places, the nails are easy to bend. If you dip some butter, soap or wax on the nail tip and then nail it, the nail will not bend.
 
Nails Tip 4: When screwing screws on hardwood, you can apply some grease or soap to the screws first, which will save you much effort. The screws on the doors and windows are loose, just put a matchstick or toothpick in the original nail hole and stick it firmly, then screw the screw in again.
 
Nailing Tip 5: First stick the tape on the wall to be nailed, then nail the nails, and tear off the tape after nailing, so that no cracks will be left on the wall. This method also works well on old painted walls to prevent the paint from peeling off when the nails are hammered.
 
Nails Tip 6: After the nails on the wall are loose, you can pull out the nails, then soak the cotton with thick paste or glue to wrap the nails around the nails, then insert the nails into the original holes and press them tightly, the nails will be firm.
 
Nails Tip 7: Tips for Nailing Wood Without Cracking
 
If you want the wood not to crack when nailing the nails, use pliers to cut off the tips of the nails. If you don’t believe it, you can try it.
 
The principle is: the pointed nails push the nail holes to both sides, which may crack the board, and after the nail head is cut off, the wood at the nail head is squeezed down, so. .
 
Nails Trick 8: Avoid hammering marks on the woodblock
 
Hammers generally have two sides, one is flat and the other is round. Use flat head nails at the beginning, and then use round heads when you are about to nail, so as to avoid leaving marks on the wood plank from the hammer.

Post time: Jan-19-2022